WRE2710-S (3G)

Call for price

The WRE2710-S is designed to tether directly to a cellular router, modem, module, or alarm panel. The WRE2710-S enhances cellular network signals to the tethered router and then back to the cell tower…which is critical for end-to-end telemetry over cellular. The WRE2710-S is the ONLY direct connect amplifier designed with patented fail-safe technologies & field-proven reliability specifically for mission-critical M2M/IoT applications.

WRE2710-S Technical Resume:

  • Tethers to a cellular router, modem, or alarm panel
  • Supports 3G; 850/1990 MHz & GSM, GPRS, CDMA HSPA & WCDMA
  • Patented Passive RF Bypass Fail-Over
  • Patented Auto Gain & Oscillation Control
  • Minimal Current draw @ 12V: 275 mA (idle) – 1 A (max)
  • Power Input Ranges +8.0 – 32.0 VDC
  • Bi-directional Plug & Play Device
  • FCC & Industry Canada Certified
  • Made In Spokane, WA U.S.A
Category: SKU: WRE2710-S

Description

ClearRF’s Patented Passive RF Bypass Fail-Over
The Passive Bypass is a fail-safe feature which allows a network signal to pass through the amplifier to the connected device, even if the amplifier loses power, faults or if signal enhancement is not required. No other M2M booster has this feature.

 

WRE2710-S (3G) Technical Resume:
  • Network compatible: 3G, 2G, GSM, GPRS, CDMA, HSPA, WCDMA
  • Frequency: 824-894 MHz / 1850-1900 MHz
  • Max RF output power: 27 dBm
  • Max RF input power: -20 dBm
  • Nominal RF gain: 15 dB idle
  • Current draw @ 12V: 250 mA (idle) – 1 A (max)
  • Input voltage: +8.0 to 36.0 VDC
  • Impedance: 50 Ohms
  • Dimensions: 4.9″ L x 2.7″ W x 0.92″ H
  • Weight: 226g / 0.5lb
  • Connector: SMA (F)
  • Operating temperature: -40°C to +70°C / -40°F to +158°F
  • Storage temperature: -40°C to +85°C / -40°F to +185°F
  • Relative humidity: 5% to 90% storage

This is a consumer device. Before use, you must register this device with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You must operate this device with approved antennas and cables as specified by the manufacturer. Antennas must be installed at least 20 cm (8 inches) from any person. You must cease operating this device immediately if requested by the FCC or a licensed wireless service provider.

Additional information

Weight .5 lbs
Dimensions 4.9 × 2.7 × .92 in

Related products