WRE2710-S-UL (UL Listed)

Call for price

The WRE2710-S-UL is UL/ULC listed and CSFM certified for commercial Fire, Intrusion & Life Safety applications; (UL 864 & ULC-S5259-13; UL 985; UL 1610; UL 1023: UL-2572; ULC S576-14; CSFM, FCC & IC certified)

The WRE2710-S-UL enhances 3G signal strength to a cellular router, modem, or alarm panel and then back to the cell tower, which is critical for real-time data comms and remote system monitoring.

WRE2710-S-UL Technical Resume:

  • Bi-directional, Plug & Play Device
  • Supports 3G, 850/1900 MHz & GSM, GPRS, CDMA, HSPA & WCDMA
  • Patented Passive RF Bypass Fail-over
  • Patented Auto Gain & Oscillation Control
  • Minimal Power Draw @ 12VDC – 250mA @ standby/ 1A @ max power
  • Power Input Ranges +8.0 – 36.0 VDC
Category: SKU: WRE2710-S-UL

Description

ClearRF’s Patented Passive RF Bypass Fail-over

The Passive RF Bypass is a fail-safe to enable the router to receive & send a network signal through the amplifier; even if the amplifier loses power or when signal enhancement is not required. For M2M applications that require network connectivity 24/7 for life safety & liability…the passive RF bypass is a vital feature. No other M2M booster has this feature. 

WRE2710-S-UL Full Listings and CSFM Certification:

  • Fire Alarm Systems: UL 864 & ULC-S5259-13
  • Household Fire Warnings: UL 985
  • Central-Station Burg/Alarm: UL 1610
  • Household Burg/Alarm: UL 1023
  • Mass Notification Systems (MNS): UL-2572 & ULC S576-14
  • California Department of Forestry & Fire Protection Certified

Electrical

  • Network compatible: 3G,2G, GSM, GPRS, CDMA, HSPA, WCDMA
  • Frequency Range: Cellular 850 (824MHz – 894MHz), PCS 1900 (1850MHz – 1990MHz)
  • 20dB BW: 850 UL: 39MHz, 1900 UL: 115MHz
  • Rated Uplink Maximum Output Power: Cellular 850; 27dBm, PCS 1900; 27dBm
  • Rated Downlink Maximum Output Power: Cellular 850; -20dBm, PCS 1900; -20dBm
  • Power Draw @ 12VDC – 250mA @ standby/1A @ max power
  • Power Requirement: 8.0 to 36.0 volts DC (negative ground), Connector is center positive
  • Nominal Gain: Cellular 850: 15dB, PCS 1900: 15dB
  • Input/output Impedance: 50 Ohms
  • Rated Mean Output Power: 27dBm

Mechanical

  • Dimensions: 4.9″ L x 2.7″ W x 0.92″ H
  • Weight: 226g / 0.5lb
  • Connector: SMA (F)

Environmental

  • Operating temperature: -40°C to +70°C / -40°F to +158°F
  • Storage temperature: -40°C to +85°C / -40°F to +185°F
  • Relative humidity: 5% to 90% storage

This is a consumer device. Before use, you must register this device with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You must operate this device with approved antennas and cables as specified by the manufacturer. Antennas must be installed at least 20 cm (8 inches) from any person. You must cease operating this device immediately if requested by the FCC or a licensed wireless service provider.

Additional information

Weight .5 lbs
Dimensions 4.9 × 2.7 × .92 in