WRE2710-S-UL (UL Listed)

The WRE2710-S-UL is the only direct connect cell signal amplifier that is UL/ ULC listed and CSFM certified for commercial Fire, Intrusion & Life Safety applications. 
The WRE2710-S-UL enhances 3G signal strength and extends signal range of Fire, Intrusion or Life Safety systems to and from the Carriers cellular network.  This is vital for companies that require real-time monitoring, control and data collection from remote telemetry systems and assets.  The WRE2710-S-UL connects directly to any commercial cellular router, modem, module, intrusion or fire alarm panel. 
WRE2710-S-UL Technical Resume:
  • UL/ ULC Listed & CSFM Certified
  • Supports 3G, 850/1900 MHz & GSM, GPRS, CDMA, HSPA & WCDMA
  • Patented Passive Bypass Technology
  • Patented Auto Gain & Oscillation Control
  • Minimal Power Consumption: 250mA @ standby/ 1A @ max power
  • Power Input Ranges +8.0 - 36.0 VDC
  • Bi-directional Plug & Play Device
  • FCC & Industry Canada Certified



ClearRF’s Patented Passive Bypass Technology 
The Passive Bypass is a fail-safe feature which allows a network signal to pass through the amplifier; even if the amplifier loses power, faults or if signal enhancement is not required. The passive bypass enables the connected device to always have access to a network signal to communicate.  No other M2M booster has this feature. 
NEW 3G UL pbp.png


WRE2710-S-UL Full Listings and CSFM Certification: 

  • Fire Alarm Systems: UL 864 & ULC-S5259-13
  • Household Fire Warnings: UL 985
  • Central-Station Burg/Alarm: UL 1610
  • Household Burg/Alarm: UL 1023
  • Mass Notification Systems (MNS): UL-2572 & ULC S576-14
  • California Department of Forestry & Fire Protection Certified


  • Network compatible: 3G,2G, GSM, GPRS, CDMA, HSPA, WCDMA
  • Frequency Range: Cellular 850 (824MHz – 894MHz), PCS 1900 (1850MHz – 1990MHz)
  • 20dB BW: 850 UL: 39MHz, 1900 UL: 115MHz
  • Rated Uplink Maximum Output Power: Cellular 850; 27dBm, PCS 1900; 27dBm
  • Rated Downlink Maximum Output Power: Cellular 850; -20dBm, PCS 1900; -20dBm
  • Current Draw @ 12VDC: Idle: 250 milliamperes; Max: 1 amperes
  • Power Requirement: 8.0 to 36.0 volts DC (negative ground), Connector is center positive
  • Nominal Gain: Cellular 850: 15dB, PCS 1900: 15dB
  • Input/output Impedance: 50 Ohms
  • Rated Mean Output Power: 27dBm


  • Dimensions: 4.9" L x 2.7" W x 0.92" H 
  • Weight: 226g / 0.5lb
  • Connector: SMA (F)


  • Operating temperature: -40°C to +70°C / -40°F to +158°F
  • Storage temperature: -40°C to +85°C / -40°F to +185°F
  • Relative humidity: 5% to 90% storage

This is a consumer device. Before use, you must register this device with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You must operate this device with approved antennas and cables as specified by the manufacturer. Antennas must be installed at least 20 cm (8 inches) from any person. You must cease operating this device immediately if requested by the FCC or a licensed wireless service provider.