WRE2710-S-ULE (UL Listed)

The WRE2710-S-ULE is a complete kit consisting of a UL/ULC listed, CSFM certified direct connect machine-to-machine (M2M) cell signal amplifier and a UL listed Enclosure; specific for commercial Fire, Intrusion & Life Safety applications. 
The WRE2710-S-UL increases and extends 3G cellular signal strength and signal range of any cellular router, modem, module or fire/intrusion alarm panel to and from the cell tower.  The WRE2710-S-ULE is vital for companies that require real-time remote monitoring & control of wireless systems and assets. 
More importantly, ClearRF is the only direct connect amplifier designed with patented passive bypass: a fail-safe feature which ensures that the connected system always remains on-line to communicate even if the amplifier loses power or faults.    
We are currently experiencing technical difficulties with our checkout process. 
Please call 509-321-9527 to place an order.


ClearRF’s Patented Passive Bypass Technology 
The Passive Bypass is a fail-safe feature which ensures that the system or device connected to the amplifier will continue to access the network even if the amplifier loses power or faults.  No other M2M booster has this vital feature, mission-critical for applications that require always on connectivity for life safety and liability reasons. 

PBP new 2.png

Full UL/ULC Listings & CSFM Certification: 
  • Fire Alarm Systems: UL 864 & ULC-S5259-13
  • Household Fire Warnings: UL 985
  • Central-Station Burg/Alarm: UL 1610
  • Household Burg/Alarm: UL 1023
  • Mass Notification Systems (MNS): UL-2572 & ULC S576-14
  • California Department of Forestry & Fire Protection Certified


  • Network compatible: 2G, 3G, GSM, GPRS, CDMA, HSPA, WCDMA
  • Frequency Range: Cellular 850 (824MHz – 894MHz), PCS 1900 (1850MHz – 1990MHz)
  • 20dB BW: 850 UL: 39MHz, 1900 UL: 115MHz
  • Rated Uplink Maximum Output Power: Cellular 850; 27dBm, PCS 1900; 27dBm
  • Rated Downlink Maximum Output Power: Cellular 850; -20dBm, PCS 1900; -20dBm
  • Current Draw @ 12VDC: Idle: 250 milliamperes; Max: 1 amperes
  • Power Requirement: 8.0 to 36.0 volts DC (negative ground), Connector is center positive
  • Nominal Gain: Cellular 850: 15dB, PCS 1900: 15dB
  • Input/output Impedance: 50 Ohms
  • Rated Mean Output Power: 27dBm


  • Dimensions: 4.9" L x 2.7" W x 0.92" H
  • Weight: 226g / 0.5lb
  • Connector: SMA (F)


  • Operating temperature: -20C to +50C
  • Storage temperature: -30C to +70C
  • Relative humidity: 5% to 90% storage

This is a consumer device.

Before use, you must register this device with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You must operate this device with approved antennas and cables as specified by the manufacturer. Antennas must be installed at least 20 cm (8 inches) from any person. You must cease operating this device immediately if requested by the FCC or a licensed wireless service provider.